The maximum print areas are: Square: approx. 0.71″ x 0.71″ (18 x 18 mm); Round: ⌀ approx. 1.02″ (26 mm): Rectangular approx. 1.10″ x 0.39″ (28 x 10 mm). If these print sizes are exceeded, extreme distortion of the logo will occur! Round or rectangular logos distort more the further they are placed from the outer edges of the print area. Due to the irregular surfaces of a golf ball, distortions may also occur within the print area in extreme cases; this is technically unavoidable. Translated with www.DeepL.com/Translator (free version)

Please specify colours in Pantone (PMS), HKS or RAL only, as printing will be carried out according to these colours. For all other colour specifications, no liability can be accepted for the exact colour shade, as there are no comparison tables for this. Slight colour deviations from your colour samples or company colours are possible due to the printed material. If we do not receive any colour information from you for print approval, we will do our best to approximate your colour. However, the later printing colour is then no reason for complaint. Due to the round shape of the ball and the pennants, slight deviations in the lines of the print may occur. These deviations are greater the larger the logo placed. There are manufacturer logos on our balls. We will do our best to place your logo in a suitable position. As the balls are inserted individually by hand for printing, logos cannot be positioned exactly to the millimetre on the individual balls.